 |
 + RF VHF UHF TV F Type Female Jack to PAL Male Plug CH $3.00 Time Remaining: 18d 18h 27m Buy It Now for only: $3.00 |
 + RF VHF UHF TV F Type 1 Male 2 Female T Connector CH $4.00 Time Remaining: 18d 18h 27m Buy It Now for only: $4.00 |
 + RF V UHF F Type Male Female PAL Female T Connector CH $4.00 Time Remaining: 18d 18h 27m Buy It Now for only: $4.00 |
 + RF VHF UHF TV PAL Male Plug to PAL Male Plug CH $3.00 Time Remaining: 18d 18h 27m Buy It Now for only: $3.00 |
 + RF VHF UHF TV F Type Male Plug to PAL Male Plug CH $3.00 Time Remaining: 18d 18h 27m Buy It Now for only: $3.00 |
 + RF VHF UHF R Angle F Type Male to Female Connector CH $3.60 Time Remaining: 18d 18h 27m Buy It Now for only: $3.60 |
 + RF VHF UHF TV F Type Male Plug to PAL Female Jack CH $3.00 Time Remaining: 18d 18h 27m Buy It Now for only: $3.00 |
can you convert an old uhf/vhf/catv male connector on a televisionto an S cable..?
the tv is a little old and i want to hook up our dvd player too it but it only has the three colored male pieces and the s video cable hook up....the old tv has the thing that you screw the plug onto.....please help?
You need an RF Modulator. It takes the composite/Component video signal and broadcasts it on channel 3/4, so you can watch it on your simpler TV.
They cost from $5-$25 dollars, if you need one, just go to radio shack and pick one up, or shop online you can find some cheap.
If your "colored male pieces" are yellow, white and red, then you can probably find something for $5-$10 or so - regular composite signal.
If they are Green, Blue, Red, then don't bother and go for a Modulator that has an S-Video plug for about $20 (in this case you still use the white and red, but not the yellow).
UHF ports